Anti-ESD Silicon Clean Mat

Electricification-preventive silicon used/Prevention of Electrostatic
Discharge/Worker`s fatigue minimized and efficiency is improved

Surface treatment for Anti-ESD

RG-400 used specially static-current preventive material for both silicon main body and and black printing
ink lines on frontal surface To reduce conductive electricty, static-current to improve repair efficiency of electronic device.

Arrangement of tiny parts in disassembly

There is storage compartment (top right) to place tiny parts against missing, neodium magnets which user additionally
purchase can be inserted at backsides of storage compartment to magnetize small parts to easily stick to tool against missing

Prevention of Electrostatic Discharge

Static-current occurred at human body or workpiece which is harmful to semiconductor parts is flown out by ground
cable (included) (Measure the value of surface resistance for our genuine mat : 10e8±2)

The function of each portion

①Ground cable - flowing occurring static-current to ground by connecting between mat and ground
(top left or bottom left)
②Storage compartment - Tiny parts are placed, also at the backside, there are grooves to insert neodium magnets to magnetize
tiny metal parts ( additional purchase)
③ANTI-STATIC LINE - Reducing occurrence of static current on mat by printed anti-ESD ink, Silicon material is withstanding
high temperature 250 celsius degrees and some chemicals

Comparasis data of half life

By comparing half life of normal silicon rubber and electrification-preventive silicon After applying electric power onto mat product,
half life (when power become half) is measured for verification (Half Life test) Half life means that elapsed time
of a certain magnitude(amount) becomes half from the initial value

① Power OFF / ② Power ON / ③ Half life is shorter(Our Electrification-preventive silicon material) /
④Half life is longer(normal silicon) - Electrification-preventive silicon - After applying electric power, measure time when half of
electric power, to verify your mat is our genuine RG-400 mat / Voltimeter and surface resistance tester will verify superiority of our
mat Semiconductor parts require prevention of outer current and voltage / Silicon material is specially withstainding high temperature
(250 celsius degrees) and some chemicals. Silicon is made by SinEtsu Japan

Direction for Silicon Clean Mat RG-400

Direction

- Ground cable and button is connected to RG-400 mat to flow out static to ground.
* Ground cable and crocodile clip is connected for convenient use to flow out static current to ground.
* Round button that you may miss should be well kept under your careful storage.
- Please connect crocodile clip of ground cable onto metal part of multiple outlet of ground.
* Crocodile clip can be disassembled, please check with your electriciy expert to confirm correct ground .

Direction for Silicon Clean Mat RG-400

Cautions in use

- Ground cable must not be connected to power source ( AC,DC). (danger of feeling electricity)
- Ground cable should be used with crocodile clip to hold metal of multiple outlet, building ground.
- If mat is cleaned with chemicals, function of mat will be degraded.
- For cleaning, after disassembly of ground cable, clean the mat with water tissue.
- If you disassemble magnets from mat with too much force, mats can be torn off.